Datalogic Skorpio User Manual

DATALOGIC SKORPIO™/ SKORPIO-GUN™
2
2 CONNECTIONS
2.1 USB CONNECTION
You can use a standard mini USB cable to connect the Datalogic Skorpio™ to a host
computer to transfer data.
A
B
C
Key:
A Host computer C 94A051016 (Standard Mini USB cable)
B Datalogic Skorpio™
CAUTION
The application of an ESD near the communication/charger pins
during the USB active sync connection to an host system could
result in an interruption of the link. Disconnect and insert again the
Mini USB jack in order to reactivate the connection.
For USB communication using the Datalogic Skorpio™ Single Cradle Desk or the
Datalogic Skorpio™ Single Cradle Ethernet, connect the cradle to the host by means
of any USB straight cord, such as Datalogic CAB-381 cable.
Insert the power supply plug into the power jack on the back of the cradle and attach
the power supply to a power outlet. Once the host has been turned on, insert the
Datalogic Skorpio™ mobile computer into the cradle.
12

Datalogic Skorpio Specifications

General

Brand	Datalogic
Model	Skorpio
Category	PDA
Language	English