Datalogic Skorpio User Manual

DATALOGIC SKORPIO™/ SKORPIO-GUN™
3
3.4 DATA CAPTURE
To capture data first of all select the barcode icon on the bottom-right side of the
display and tap the 'Capture' menu item then proceed with the following directions.
To configure and enable data capture parameters refer to par. 3.7.
3.4.1 Laser Data Capture
To scan barcodes, point the Datalogic Skorpio™ laser model onto the code from a
distance within the reading range while pressing the SCAN key.
The lighted band emitted by the laser must completely intercept the barcode as
shown in the figure below. If enabled, the emission of an acoustic signal will indicate
that the scan has taken place correctly.
26

Datalogic Skorpio Specifications

General

Brand	Datalogic
Model	Skorpio
Category	PDA
Language	English