Datalogic Skorpio User Manual

USE AND FUNCTIONING
3
2. Tap Align Screen to open the Calibration screen shown in Figure 4.
3. Carefully press and briefly hold stylus on the center of the target. Repeat as the
target moves around the screen. Press the <ESC> key at any time to cancel the
stylus calibration.
4. By completing the calibration procedure you implicitly accept the new calibration
settings.
5. New calibration settings are persistently saved in registry.
Figure 4
57

Datalogic Skorpio Specifications

General

Brand	Datalogic
Model	Skorpio
Category	PDA
Language	English