Datalogic Smart-VS Plus User Manual

TCP/IP COMMUNICATION
65 SMART-VS PLUS
STBCK (SToreBaCKup)
It allows to save the binary file containing the device backup on the device's flash mem-
ory. The file must be previously uploaded to the exchange area. The device switches
from the “Running” state to the “Configuration” state.
Syntax:
STBCK;Force <CR><LF>
Force:
forces the flash to be overwritten.
Reply:
STBCK;Returncode<CR><LF>
Possible return codes:
• Success → command successful.
• AlreadyInConfiguration → a configuration has already started and the file cannot
be loaded.
• InvalidInput → corrupted file or not loaded (exchange area empty).
• Failed → the file loaded in the exchange area is not a file containing a BackUp.
FNZJBF (FiNalaZeJoBFile)
Finalizes the asynchronous command to create a binary file containing a single job
(“
CRTJBF (CReaTeJoBFile)" on page 63).
Syntax:
FNZJBF<CR><LF>
Reply:
FNZJBF;ReturnCode;FileSizeByte <CR><LF>
FileSizeByte: Returns the size of the created file in bytes. The size of the file to be down-
loaded from the device, due to the base64 encoding, can be obtained with the following
formula:
or divided by 3, rounded up to the nearest integer, then multiplied by 4.
Possible return codes
:
• Success → command successful.
• NotInProgress → no asynchronous tasks in progress.
• OtherInProgress → another asynchronous task is in progress.
• Failed → package creation failed.
VALUE FORCE
0 False
1 True
CAUTION: To return to the “Running” state, you need to perform one of the
following operations:
• Finalize the creation of the package containing the job using the
FNZBST command
• Close the client connection with the device

Datalogic Smart-VS Plus Specifications

General

Brand	Datalogic
Model	Smart-VS Plus
Category	Security Sensors
Language	English