Datalogic VS Series User Manual

INSTRUCTION MANUAL
> DataVS2 - VSM

Datalogic VS Series Specifications

General

Brand	Datalogic
Model	VS Series
Category	Controller
Language	English

Summary

General Information

General Description of VSM

Describes the VSM as a visualization and control device for DataVS2 vision sensors.

Installation Procedures

Safety Recommendations for Installation

Lists essential safety precautions to follow during installation and use of the device.

DataVS2 VSM DIN Rail Mounting

Details the procedure for mounting the VSM unit onto a DIN guide using its rear slot.

Electrical Connections

First Approach to VSM

Connecting to DataVS2

Describes powering on VSM and connecting to DataVS2 via LAN discovery.

Monitoring an Inspection

Inspection Change Procedure

Inspection Parameter Changes

Camera Parameter Adjustments

Details how to adjust camera parameters like exposure time, gain, and illuminator mode.

Tool Parameters Modification

Explains how to change parameters related to specific inspection tools.

Region of Interest (ROI) Change

Details how to modify the Region of Interest (ROI) for selected tools (Move, Resize, Rotate).

Reference Image Update

Describes how to capture and set a new reference image for the current inspection.

Advanced Functions

Memory Management

Explains procedures for transferring or cancelling memory slots between VSM and DataVS2.

Factory Reset Procedure

Guides the user through performing a factory reset on the VSM device.

User Account Management

Describes how to set passwords to protect the system and manage user accounts.

Removal of Administrator Password

Details the procedure to disable accounts and remove the administrator password.

DataVS2 GUI Connection

VSM Firmware Update Process

Explains how to update the VSM firmware using the DataVS2 GUI.

Recovery Mode Operations

Recovery Procedure Steps

Provides step-by-step guide to restore VSM using recovery firmware via DataVS2 GUI.