Datalogic VS Series User Manual

ADVANCED FUNCTIONS
23
8
8 ADVANCED FUNCTIONS
The previous chapter described the procedure used to modify an inspection for DataVS2.
Further to the functions above-described, there are other user settings on the VSM monitor
which can be accessed from the System menu.
“System” menu is accesed from “Monitor” pressing STATUS.
NOTE
The “Disconnect” icon is displayed only when a DataVS2 is connected as it
indicates the active status of the sensor connection.
8.1 MONITOR SETTINGS
This panel provides access to VSM information such as name, serial number, model, etc…
Moreover the IP and NetMask network parameters can be modified and the data of the last
DataVS2 connected can be displayed.
To change the network parameters, the user has to simply move the focus on the desired
value and use the UP/DOWN ARROWS to increase or decrease the current value.
To save the changes press SET.
Indication of connected sensor
Network
Parameters
Data of DataVS2
connected
Product info

Datalogic VS Series Specifications

General

Brand	Datalogic
Model	VS Series
Category	Controller
Language	English