ADVANCED FUNCTIONS
8.5 SENSOR LIST
The “Sensor List” panel, after having made a discovery, lists the DataVS2 present in the
subnet.
To connect a sensor the user just has to select it from the list with the UP/DOWN ARROWS
and press SET.
Once the connection has been established, the VSM returns immediately to the monitor
mode.
8.6 USERS
This panel allows the user to set a password to protect the system. This protects the sensor
against accidental or unauthorised modifications. In the factory setting the password is
disabled for all accounts.
Firstly, the operation to effect on the profiles must be selected: “Selection” or “Modify” and
then press SET.
To Next Page
Loading...
