10 A-Class
2.1.1 Contents
Check the contents of the carton for the following items:
• Printer
• Power cord
• Accessories CD-ROM
• Any additionally purchased items or options.
2.1.2 Additional Requirements
Other items can also be needed for operation:
• Media (and ribbon, if necessary); see Section 7.2.
• Interface cables; see Section 2.2.2 (Host) and Appendix D
(Applicator).
• Software; see the Accessories CD-ROM for Windows
Drivers and basic labeling software.
2.2 Installation
Before installing the printer, ensure that the environmental conditions of the site fall within
the range specified in Section 7, and always avoid the following environments:
• Do not place the printer in direct sunlight or near a heat source; and,
• Do not place the printer where it will be exposed to liquids, or excessive dust or dirt.
2.2.1 Mounting Requirements
Consider the dimensions of the printer before attaching it to the applicator station. The
template below details the opening size and hole locations required for the support
structure:
To Next Page
Loading...
