A-Class 45
Printer Options (continued)
Menu Item Details
LEADING
Adds nulls to the front (left) of the data if less than the
size, or cuts the data if greater.
TRAILING
Adds nulls to the end (right) of the data if less than
the size, or cuts the data if greater.
LOCK AFTER WRITE
Allows the tag to be locked after programming, where:
ENABLED
Locks the tag.
DISABLED
Does not lock the tag.
RETRY ATTEMPTS Determines the number of function attempts that will
be made, where:
3 (0 - 9)
Is the number of retry attempts.
PERFORM CALIBRATION Allows the printer to establish the tag to transducer
distance and nominal power setting, where:
YES
Initiates the process; CALIBRATING RFID will be
displayed as media is scanned for the tag location and
power, followed by TOF positioning and the results
where, if successful, the database parameters will be
updated.
NO
No calibration occurs.
SET DEFAULTS
Allows the RFID settings to be restored to the factory
values, where:
YES Returns the RFID settings to default values.
NO
Retains the current settings.
4.2.4 System Settings
The System Settings menu contains operating, control, and formatting functions:
Menu Item Details
CONFIGURATION FILE
Controls the creation, storage, and recall of printer
configuration files (see Appendix F), where:
RESTORE AS CURRENT
Lists the files available and then, after selection,
reconfigures the printer according to that file.
SAVE SETTING AS
Saves the effective printer configuration to a named
file of up to nineteen characters.
To Next Page
Loading...
