Datamax A-Class A-6310 - Page 60

46 A-Class
System Settings (continued)
Menu Item Details
DELETE FILE
Lists the files available and then after selection,
removes that file from memory.
; An active file can not be deleted.
FACTORY SETTING FILE
Lists the files available, and then after selection that
file will be restored whenever a Level One reset (see
Section 5.6.2) is performed.
INTERNAL MODULE D
Allocates a number of 1KB memory blocks for internal
Memory Module D; where:
1024 KB (XXX – XXXX KB)
Is the memory allocation; see Appendix A.
DEFAULT MODULE
Designates the storage module when no memory
location is specified; where:
D
Is the module; see Appendix A for availability.
SCALEABLE FONT CACHE
Configures the number of 1KB memory blocks for the
scaleable font engine; where:
0312 (XXX – XXXX KB) Is the memory allocation; see Appendix A for
availability.
SINGLE BYTE SYMBOLS
Sets the code page used for single byte fonts, where:
PC_850 MULTILINGUAL Is the selected code page. (See the Class Series 2
Programmer’s Manual for details.)
DOUBLE BYTE SYMBOLS
Selects the code page (see the Class Series 2
Programmer’s Manual) used for the ILPC option
(unless otherwise specified), where:
JIS Is Japanese Industry Standard.
SHIFT JIS Is Shift Japanese Industry Standard.
EUC Is Extended UNIX Code.
UNICODE
Is Unicode (including Korean).
GB
Is Government Bureau Industry Standard, Chinese
(PRC).
BIG 5 Is Taiwan encoded.