I-Class 5
readability of printed bar codes. Minimum bar code “X” dimension is 10 mils;
maximum width is 4 inches (101 mm).
Peel and Present Mechanism (requires the Internal Rewind option)
An output control device that automatically separates printed labels from the
backing material and allows subsequent printing to occur only after the removal
of a previously printed label. Minimum label length is 1.5 inches (38 mm).
Present Sensor
An output control device that allows subsequent printing to occur only after the
removal of a previously printed label.
RS-422 Serial Interface**
Single-drop interface hardware to support greater distances from the host at
communication rates of up to 38,400 baud.
Thermal Transfer (specify configuration at time of order)
A printing method that uses ribbon to produce exceptional image clarity, as
compared to most direct thermal media types. This option must be specified for
use with either ‘coated side in’ ribbon or ‘coated side out’ ribbon.
Twinax/Coax Interface
A slide-in circuit card assembly that provides connectivity to AS/400 and
System/3X Twinax host system or 3270-type host system. Cable included.
USB Port
A slide-in circuit card that provides the printer with a Universal Serial Bus,
Version 1.1, for Windows
printing environments only.
*Item unavailable for the I-4206.
**Item unavailable for the I-4206 and I-4208 models.
To Next Page
Loading...
Need help?
General