Important Safety Instructions
This printer has been carefully designed to provide many years of safe, reliable performance. As with all electrical
equipment, there are a few basic precautions you should take to avoid hurting yourself or damaging the printer:
• Carefully read the installation and operating instructions provided with your printer.
• Read and follow all warning instruction labels on the printer.
• Place the printer on a flat, firm, solid surface.
• To protect your printer from overheating, make sure all openings on the printer are not blocked.
• Do not place the printer on or near a heat source.
• Do not use your printer near water, or spill liquid into it.
• Be certain that your power source matches the rating listed on your printer. If you are unsure, check with your dealer or
with your local power company.
• Do not place the power cord where it will be walked on. If the power cord becomes damaged or frayed replace it
immediately.
• Do not insert anything into the ventilation slots or openings on the printer.
• Only qualified, trained service technicians should attempt to repair your printer.
To Next Page
Loading...
Need help?
General