M-Class 49
5.1.5 System Settings
CONFIGURATION FILE ♦
Options for storage and recall of printer configuration files. See Appendix E for
details.
RESTORE AS CURRENT
Provides a list of available configuration files. Selecting a file from the list causes a
printer reset; afterward, the printer is configured according to the activated file.
SAVE SETTING AS
Saves the entire effective configuration of the printer to a file. Unique names with
up to nineteen characters are possible.
DELETE FILE
Provides a list of available configuration files. Files selected are immediately
removed, freeing the module.
Note: A currently activated file can not be deleted.
FACTORY SETTING FILE
Provides a list of available configuration files. The selected file will be restored
whenever a Level 1 reset is performed; see Section 6.7.
INTERNAL MODULE D
1024 KB (100-5120)
Sets the number of 1K blocks allocated for the internal RAM ‘D’ module.
DEFAULT MODULE
D
Sets the default module used to store files when no other module is specified.
Available choices are G=FLASH memory or D=RAM memory
SCALEABLE FONT CACHE
0312 KB (100-5120)
Sets the number of 1K blocks allocated for the scaleable font engine. Available
memory dependent upon model.
SINGLE BYTE SYMBOLS
Selects the code page used to print single byte fonts unless otherwise specified in DPL.
PC_850 MULTILINGUAL
One of many selectable standard sets; see the Class Series Programmer’s Manual
for details.
DOUBLE BYTE SYMBOLS
When equipped with the ILPC option, this selects the code page used to print double
byte fonts unless otherwise specified in DPL; see the Class Series Programmer’s
Manual.
UNICODE
Unicode (including Korean)
GB
Government Bureau Industry Standard; Chinese (PRC)
BIG 5
Taiwan encoded
JIS
Japanese Industry Standard
SHIFT JIS
Shift Japanese Industry Standard
EUC
Extended UNIX Code
TIME AND DATE
Allows the user to set the time and date.
To Next Page
Loading...
Need help?
General
