Datamax M-Class User Manual

M-Class 81
6.2 Media Width Adjustment
When printing on less than full width media, the printer has a printhead-leveling cam to adjust the right side of the printhead
for even pressure distribution. To adjust the leveling cam:
1. With media loaded in the printer, print a label and
examine it.
Non-display printers:
Simultaneously press the
PAU SE
+
FEED
buttons
Display printers:
See Section 5.3.1
2. While observing the printed labels, loosen the
Thumbscrew and move it to the left most position. (see
Example 1, below).
3. Next, move the Thumbscrew to the right until the
printed labels contain a complete, even image (see
Example 2). Tighten the Thumbscrew.
Example 1 – Over
adjustment:
Too much adjustment
produces an image that
fades across the label.
To correct this, move
the Thumbscrew to the
right.
Example 2 – Correct
adjustment:
The proper adjustment
produces a complete
image with even print
contrast across the label
(see note below).

When changing to a different width of label, readjust the Leveling Cam.
 Note: Under-adjustment of the Leveling Cam: Problems can include ribbon wrinkling, label tracking, and platen roller and
printhead wear.

Datamax M-Class Specifications

General

Brand	Datamax
Model	M-Class
Category	Printer
Language	English