Datamax M-Class User Manual

M-Class 67
5.3.4 Validation Label
The Validation Label is another useful tool for evaluating overall print quality. To generate a Validation Label:
 Press the Key.
 Use the
FWD
Key to scroll to ‘Validation Label’.
 Use the
Key to select a quantity; see Section 5.0.3.
 Press the
Key to start printing.
5.3.5 Print Last Label
Print Last Label reprints the last label format printed. The format can be any of the Test Labels, a label from the host, or
one recalled from memory.
 Note: If a job was cancelled prior to its completion, or if power has been removed since the last print job and the request for this label, this selection
will print a ‘VOID’ message.
5.3.6 User Defined Label
The User Defined Label reprints from a list of previously printed label formats. Use the
FWD
Key to scroll through the
listing, then use the
Key to select and print the label.
 Note: If a job was cancelled prior to its completion, or if power has been removed since the last print job and the request for this label, ‘NO FILES
AVAILABLE’ will be displayed and no printing will occur.

Datamax M-Class Specifications

General

Brand	Datamax
Model	M-Class
Category	Printer
Language	English