Datasat AP25 - Page 4

AP25 Installation and Operating Guide Page 4
AP25 Installation & Operating Guide Document # 9301H79500 Ver. 1.00
TABLEOFCONTENTS
INTRODUCTION 6
PART 1: OPERATION 13
1.0 OPERATING AP25 14
1.1 HOW-TO PROCEDURES – OPERATIONS 14
1.2 FRONT PANEL CONTROLS AND INDICATORS 15
1.3 POWERING ON THE AP25 PROCESSOR 16
NAVIGATING THROUGH THE MENUS 17
1.4 THE HOME SCREEN 17
1.4.1 ADJUSTING THE FADER 18
1.4.2 BOOTH MONITOR VOLUME 19
1.4.3 MANUAL AUTOMATION 20
1.5 TROUBLESHOOTING (OPERATION) 20
PART 2: INSTALLATION AND SETUP 22
2.0 INSTALLATION AND SET UP 24
2.1 INSTALLATION CHECKLIST 24
2.2 UNPACKING SYSTEM COMPONENTS 25
2.2.1 PRELIMINARY INSPECTION 25
2.3 INSTALLATION OVERVIEW 25
2.4 AP25 REAR PANEL CONNECTIONS 25
2.5 CHASSIS RACK MOUNTING AND CONNECTION 26
2.5.1 RACK MOUNT RECOMMENDATIONS 26
2.5.2 POWER SUPPLY 27
2.6 NAVIGATING THE MENUS 27
2.7 ABOUT FORMATS 27
2.7.1 CREATING AN AUDIO FORMAT 30
2.8 FACTORY PRESETS 31
2.8.1 PRESET FORMATS 31
2.8.2 DEFAULT EQ 32
2.8.3 DEFAULT CHANNEL PROFILES 32
2.9 AP25 CONFIGURATION AND SETUP 33
2.9.1 EQUIPMENT REQUIREMENTS 33
2.9.2 SETTING AND ADJUSTING AUDIO OUTPUT LEVELS 33
2.9.3 THEATER EQUIPMENT CHECK 34
2.9.4 ASSIGN CHANNELS ON AP25 34
2.9.5 HEARING IMPAIRED OUTPUT 36
2.9.6 VERIFY CHANNEL ASSIGNMENTS IN AUDITORIUM 36
2.10 B CHAIN ALIGNMENT USING 1/3 OCTAVE EQ 36
2.10.1 SET LEVELS TO ESTABLISH A BASELINE 38
2.10.2 PERFORM THE EQ 39
2.11 SUBWOOFER EQ – PARAMETRIC EQ 41
2.12 COPY EQ SET TO ANOTHER EQ SET 42
2.13 FINAL ADJUSTMENTS 42
2.14 COPY FORMAT 43
2.15 SETTING UP MULTIPLE SCREENS 43
2.16 USING DIRAC LIVE® TO TUNE THE AUDITORIUM 43