Need help?Do you have a question about the Datascope Passport 2 and is the answer not in the manual?
Overview of the Operation chapter, refers to other sections for details.
Details on the physical controls, indicators, and connectors of the Passport 2 unit.
Details on how to operate the Passport 2 unit, refers to separate Operating Instructions.
Explains the main program and system controller, including MPC860T Host CPU and serial channels.
Describes the ECM Frontend module for patient signal acquisition like ECG, IBP, Temp, and Respiration.
Details the Non-Invasive Blood Pressure module, its microcontroller, and pneumatic system control.
Explains the power supply design, including voltage generation and regulation for various modules.
Describes the SpO2 interface PCB for communication between SpO2 modules and the CPU.
Details the functionality of the recorder interface board for power filtering and fan control.
Overview of the chapter providing technical information for instrument repairs.
Essential warnings and guidelines to follow when removing instrument covers and performing repairs.
Steps and advice for identifying and resolving problems with the instrument.
Step-by-step guide for taking apart the Passport 2 unit for repair.
Visual representation of the instrument's internal components and their interconnections.
Procedures for entering diagnostic mode and running various hardware tests.
Tests for verifying the functionality and accuracy of the NIBP module.
Procedures for verifying the proper operation of all physiological measurement parameters.
List of required periodic maintenance activities for the Passport 2 monitor.
Instructions for cleaning the monitor enclosure and display screen safely.
Guidance on replacing and maintaining the unit's batteries.
Details on the product warranty terms and conditions for different regions.
General| Device Type | Patient Monitor |
|---|---|
| Model | Passport 2 |
| Display | Color LCD |
| Parameters Monitored | ECG, SpO2, NIBP, Temperature, Respiration |
| Power Supply | 100 to 240 VAC, 50/60 Hz |
| Battery | Rechargeable lithium-ion |
| Connectivity | Ethernet |
| Manufacturer | Datascope Corp. |
| Dimensions | 11.5" H x 11.5" W x 6.7" D (29.2 cm H x 29.2 cm W x 17.0 cm D) |
To Next Page
