4: Radio Programming
PRC1099A-MSOP 4-13
SELF ADD Self Address. For entering and modifying the 20 possible
self addresses for the radio.
1. Toggle the TUNE knob to select a number to assign to
the address. Press
WHIP TUNE to enter the selection.
2. Toggle the
TUNE knob to scroll to the first letter, num-
ber or symbol of the address (the letter A is displayed
to start you off). Use the _ symbol to enter a space.
3. Press WHIP TUNE to enter. Continue this process until
the address is complete (up to 15 characters).
4. To save the address, scroll to the save symbol
immediately below the A in the symbol sequence.
5. Press WHIP TUNE to complete the process.
OTHR ADD Other Address. When a station initiates a call, the identity
of the station to call must be included within the sent ALE
message. This selection is for entering and modifying the
100 possible other addresses for the radio. Assign the
lowest numbers to addresses that are called most often.
1. Toggle the TUNE knob to select a number to assign to
the address. Press WHIP TUNE to enter the selection.
2. Toggle the TUNE knob to scroll to the first letter, num-
ber or symbol of the address (the letter A is displayed
to start you off). Use the _ symbol to enter a space.
3. Press WHIP TUNE to enter. Continue this process until
the address is complete (up to 15 characters).
4. To save the address, scroll to the save symbol
immediately below the A in the symbol sequence.
5. Press WHIP TUNE to complete the process.
Selection Description
To Next Page
Loading...
