4: Radio Programming
4-14 PRC1099A-MSOP
NET ADD Net Address. When a station initiates a call to a net, the
identity of the net must be included in the ALE message.
This selection is for entering and modifying the 20
possible net addresses.
1. Toggle the TUNE knob to display the number to assign
to the address. Press WHIP TUNE to save the selection.
2. Toggle the TUNE knob to scroll to the first letter, num-
ber or symbol of the address (the letter A is displayed
to start you off). Use the _ symbol to enter a space.
3. Press WHIP TUNE to save. Continue this process until
the address is complete (up to 15 characters).
4. To save the address, scroll to the save symbol
immediately below the A in the symbol sequence.
5. Press WHIP TUNE to complete the process.
NET SELF Net Self. For assigning a slot number to each net self
address. Because net self addresses are identical to self
addresses, they are created or modified using the SELF
ADD selection.
1. Toggle the TUNE knob to display the net address to
assign to a slot number and press WHIP TUNE.
2. Toggle the TUNE knob to select a slot number (00 to
99). Refer to "Net Self Note 1" on page 4-18.
3. Press WHIP TUNE to save the number.
4. Toggle the TUNE knob to display your slot start time.
Refer to "Net Self Note 2" on page 4-18.
5. Press WHIP TUNE to save it.
NET OTHR Net Other. For selecting the addresses of other stations to
be included in the net. These addresses are entered using
the OTHR ADD selection.
1. Toggle the
TUNE knob to display an address to include
in the net. Press WHIP TUNE to save it. An asterisk *
indicates that address is added.
2. Continue adding addresses in the same manner.
3. To save all selected net addresses, scroll to
OTHR *** and press WHIP TUNE.
Selection Description
To Next Page
Loading...
