4: Radio Programming
4-16 PRC1099A-MSOP
SOUND IN Sound Interval. For selecting the time interval between
sounding transmissions.
1. Toggle the TUNE knob to increase or decrease the
sounding interval (1 minute increments between 1
minute and 24 hours).
2. Press WHIP TUNE to save the setting.
CALL LMT Call Retry Limit. For entering the number of attempts to
try and establish communications on each channel.
1. Toggle the TUNE knob to increase or decrease the call
retry limit (2 to 6).
2. Press WHIP TUNE to save the setting.
SELF TO Self Time Out. For setting the length of time the radio
remains linked after initiating a call, if there is no traffic
on the channel after linking.
1. Toggle the TUNE knob to increase or decrease the self
time out (from 15 to 600 seconds in steps of 15
seconds).
2. Press WHIP TUNE to save the setting.
OTHER TO Other Time Out. For setting the length of time the radio
remains linked after receiving a call.
1. Toggle the TUNE knob to increase or decrease the
other time out (from 15 to 600 seconds in steps of 15
seconds).
2. Press WHIP TUNE to save the setting.
AFILLSEL Autofill Select. For setting the radio to automatically
select and retain addresses of other radios it hears over the
air but with which it has never made contact.
1. Toggle the
TUNE knob to toggle between ON and OFF.
2. Press WHIP TUNE to save the setting.
LQA SEL LQA Exchange. For turning the automatic LQA
information exchange feature on or off. LQA is a
numerical evaluation grade given to each channel after it
is used.
1. Toggle the
TUNE knob to toggle between ON and OFF.
2. Press
WHIP TUNE to save the setting.
Selection Description
To Next Page
Loading...
