dCS 900E / 902E User Manual Manual for Software Versions 1.3x to 1.5x
dCS Ltd 12
th
June 2000
Manual part no: DOC0029021E1 Page 48 Document No: OS-MA-D0002-902.1E1
Contact dCS on + 44 1799 531 999 email to: more@dcsltd.co.uk
(inside the UK replace + 44 with 0) web site: www.dcsltd.co.uk
Power Consumption
The dCS 900 & 902 have a linear power supply, and so power consumption
changes as the mains voltage changes. The internal regulation is comparatively
efficient for a linear supply, so these changes are kept to a minimum.
Consumption is independent of mains voltage selector switch setting.
Power Consumption with Mains Voltage (measured as AC power into mains
socket):
Nominal mains 25 W
Mains -10% 22 W
Mains +10% 27 W
The actual intended supply voltage is shown on the rear panel. 50Hz or 60Hz
operation is not important – the unit can use either. In general, users will not
need to change the mains input configuration. If you do need this to be done,
please see the section "Having Your Options Changed”, page 54 in this
manual and contact your distributor or dCS.
To Next Page
Loading...
