dCS 900E / 902E User Manual Manual for Software Versions 1.3x to 1.5x
dCS Ltd 12
th
June 2000
Manual part no: DOC0029021E1 Page 54 Document No: OS-MA-D0002-902.1E1
Contact dCS on + 44 1799 531 999 email to: more@dcsltd.co.uk
(inside the UK replace + 44 with 0) web site: www.dcsltd.co.uk
OPTIONS
Mains Voltage
We ship with the mains wired according to the destination. The voltage option
should be specified when the unit is ordered, by specifying the country of use. It
can be updated later by your dealer, if necessary.
Video Frequency VCXOs
We can fit additional video frequency VCXOs (enabling frequencies such as
44.056 kS/s and 47.952 kS/s). These must be fitted at dCS, to allow full
checking.
P3D, DSD Pro and Other Formats
We can fit larger FPGAs to allow P3D, DSD Pro and other formats. This has to
be done at dCS.
Ordering Options For A New Unit
To order any option, just tell us:
dCS 900 for use in <country>, with options ….
or
dCS 902 for use in <country>, with options ….
IMPORTANT! Always specify the intended country of operation, otherwise we will assume
that country of delivery is the same as country of operation.
Having Your Options Changed
dCS support modifications, updates and option changes to supplied dCS 900 &
902 units. If you are in any doubt, please contact your Distributor or dCS. In
general, these will be carried out at dCS, because we have extensive test
facilities and can verify the changes.
IMPORTANT! Please do not attempt the changes yourself. The unit's performance and
reliability may be impaired, and the warranty will be invalidated.
To Next Page
Loading...
