dCS 900E / 902E User Manual Manual for Software Versions 1.3x to 1.5x
dCS Ltd 12
th
June 2000
Manual part no: DOC0029021E1 Page 9 Document No: OS-MA-D0002-902.1E1
Contact dCS on + 44 1799 531 999 email to: more@dcsltd.co.uk
(inside the UK replace + 44 with 0) web site: www.dcsltd.co.uk
If you want to record less than 24 bit data, press the Word Length button
repeatedly until the required Word Length is displayed and press the Noise
Shaping button repeatedly until Auto is displayed.
Note that all the outputs are active simultaneously on the dCS 900 / 902. If the
mode the unit is in needs them to be different, they will be – otherwise they will
be the same, and may all be connected to external equipment simultaneously if
required.
Now you will need to familiarise yourself with how the front panel controls and
the menu system work.
do this: Read the short section on “The Software – The Menu” on page 18 so
you know how the buttons and menu work.
You may also find it convenient to refer to the Function Menu Guide while you
are getting to know the unit.
To Next Page
Loading...
