11
8.2 Startup Wizard
The Setup Wizard is designed to make starting your system quick and easy. By default, when the system is
powered on for the first time the Setup Wizard will launch automatically. Advanced settings are available from
the Main Menu if additional setup is required. See section 10 Main Menu & Advanced Setup for
instructions.
STANDARD SETUP WIZARD COMMAND BUTTONS
GENERAL SETTI NGS
General Tab
De vice Na me:
The default name is NVR however it can be changed to a name of your choice
up to a maximum of 32 characters.
De vice No .:
Can be used when you have multiple devices on your network to easily identify
this device or left as the default.
Langua ge:
English is the only language option available on this device.
Vid eo Standa rd:
Use the drop down to select from the options:
NTSC – North American video format
PAL – European video format
If you are located in North America and select PAL the live stream of
your cameras will stop.
HDD Full:
Use the drop down to select if the system will record when the hard drive is full:
BACK
Click to return to the previous setup step.
NEXT
Click to move to the next setup step.
CANCE L
Click to exit the Setup Wizard.
To Next Page
Loading...
Need help?
General
