48
PTZ Activ ation:
When selected the PTZ action is enabled when tampering is detected.
PTZ S et:
Click to select the PTZ actions for each Channel (Camera).
Post Re cord:
Enter the number of seconds the system will continue to record after tampering is
detected.
Tour :
When selected a tour of all selected PTZ cameras will start and automatically
scan the viewing area. Select the cameras to include in the tour.
Snapshot:
When selected the system will take a snapshot when tampering is detected on
the selected Channel (Camera). Click the Channels (Cameras) that will take a
snapshot when tampering is detected on this Channel (Camera).
Log E nable :
When selected the tampering event will appear in the Log.
See Main Menu:
INFO > LOG
Bu zzer:
When selected the system buzzer will be enabled when tampering is detected.
To Next Page
Loading...
