Figure 69. Installing 2 x 3.5 inch rear drive cage
Next steps
1. Connect all the cables to the rear drive backplane.
2. Install all the drives.
3. Follow the procedure listed in After working inside your system.
System memory
System memory guidelines
The PowerEdge systems support DDR4 Registered DIMMs (RDIMMs), Load Reduced DIMMs (LRDIMMs), Non-Volatile DIMMs
(NVDIMM-Ns), and DCPMM. System memory holds the instructions that are executed by the processor.
Your system contains 24 memory sockets split into two sets of 12 sockets, one set per processor. Each 12-socket set is organized into six
channels. Six memory channels are allocated to each processor. In each channel, the release tabs of the first socket are marked white, and
the second socket black.
Installing and removing system components
115
To Next Page
Loading...
