Dell EMC PowerEdge R740xd - Right Control Panel View

iDRAC Quick Sync 2 indicator codes
iDRAC Quick Sync 2 module (optional) is located on the left control panel of your system.
Figure 6. iDRAC Quick Sync 2 indicators
Table 6. iDRAC Quick Sync 2 indicators and descriptions
iDRAC Quick Sync 2 indicator
code
Condition Corrective action
Off (default state) Indicates that the iDRAC Quick Sync 2
feature is turned off. Press the iDRAC
Quick Sync 2 button to turn on the iDRAC
Quick Sync 2 feature.
If the LED fails to turn on, reseat the left control
panel flex cable and check. If the problem persists,
see Getting help.
Solid white Indicates that iDRAC Quick Sync 2 is ready
to communicate. Press the iDRAC Quick
Sync 2 button to turn off.
If the LED fails to turn off, restart the system. If the
problem persists, see Getting help.
Blinks white rapidly Indicates data transfer activity.
If the indicator continues to blink indefinitely, see
Getting help.
Blinks white slowly Indicates that firmware update is in
progress.
If the indicator continues to blink indefinitely, see
Getting help.
Blinks white five times rapidly and
then turns off
Indicates that the iDRAC Quick Sync 2
feature is disabled.
Check if iDRAC Quick Sync 2 feature is configured to
be disabled by iDRAC. If the problem persists, see the
Getting help section. For more information, see
Integrated Dell Remote Access Controller User's
Guide at www.dell.com/poweredgemanuals or Dell
OpenManage Server Administrator User’s Guide at
www.dell.com/openmanagemanuals > OpenManage
Server Administrator.
Solid amber Indicates that the system is in fail-safe
mode.
Restart the system. If the problem persists, see
Getting help.
Blinking amber Indicates that the iDRAC Quick Sync 2
hardware is not responding properly.
Restart the system. If the problem persists, see
Getting help.
Right control panel view
Figure 7. Right control panel view
PowerEdge R740xd system overview
13