4 Close the front panel door.
5 Install the:
a Front bezel
b Side cover
6 Follow the procedure in After working inside your computer.
Power button
Removing power button
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a Side cover
b Front bezel
3 Open the front panel door.
4 To release the power button:
a Disconnect the power button cable from the system board [1].
b Unroute the power button cable through the retention clip [2].
c Press the release tabs using a plastic scribe and slide the power button out from the front of the system [3].
d Close the front panel door [5].
Removing and installing components
47