Replacing the Base Cover | 15
Replacing the Base Cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before You Begin" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Align the tabs on the base cover with the slots on the computer base and slide the
base cover into place.
2 Replace the screws that secure the base cover to the computer base.
Postrequisites
Follow the instructions in "After Working Inside Your Computer" on page 13.
Book.book Page 15 Friday, June 28, 2013 11:10 AM
To Next Page
Loading...
