Replacing the Memory Module(s) | 21
3 If you have replaced memory module(s) in connectors DIMM3 and DIMM4, go to
Postrequisites.
4 If you have replaced memory module(s) in connectors DIMM1 and DIMM2:
Replace the palm rest. See "Replacing the Palm Rest" on page 42.
Postrequisites
1 Replace the battery pack. See "Replacing the Battery Pack" on page 17.
2 Replace the base cover. See "Replacing the Base Cover" on page 15.
3 Follow the instructions in "After Working Inside Your Computer" on page 13.
Book.book Page 21 Friday, June 28, 2013 11:10 AM
To Next Page
Loading...
