Installing the Power Supply Unit (PSU)
1 Hold the PSU handle and push the unit into its compartment until it clicks into place.
2 Follow the procedures in After Working Inside Your Computer.
Removing the Front Cover
NOTE
: The front cover can be secured using the front panel-chassis lock. For more information the front-panel chassis lock, see
Additional Information — Front Panel Chassis Lock.
1 Follow the procedures in Before Working Inside Your Computer.
2 Press down on the front cover release latch.
3 Keep the latch pushed down, and pull the front cover in an outward direction to remove it from the computer.
Removing and installing components
11
To Next Page
Loading...
