Steps
1. Remove the four screws (#6-32x1/4") that secures the left liquid-cooling assembly fan to the liquid-cooling assembly.
2. Lift the left liquid-cooling assembly fan off the liquid-cooling assembly.
3. Remove the four screws (#6-32x1/4") that secures the right liquid-cooling assembly fan to the liquid-cooling assembly.
4. Lift the right liquid-cooling assembly fan off the liquid-cooling assembly.
Installing the liquid-cooling assembly fan
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the left-side cover.
About this task
The following images indicate the location of the liquid-cooling assembly fan and provide a visual representation of the removal
procedure.
Removing and installing components
67
To Next Page
Loading...
