Dell E525w - PS Settings

Understanding the Printer Menus 135
PS Settings
Use this menu to change printer settings that only affect jobs using the PostScript 3 Compatible printer language.
PS Error Report
Purpose:
To specify whether to print the contents of PostScript 3 Compatible errors.
The change becomes effective after the printer is turned off and then on again.
Va lu e s:
NOTE: Instructions from the PS driver override the settings specified on the operator panel.
PS Job Time-Out
Purpose:
To specify the runtime of one PostScript 3 Compatible job. The change becomes effective after the printer is turned
off and then on again.
Va lu e s:
Output Color
Purpose:
To specify the color mode to color or black and white.
Va lu e s:
Image Depth
Purpose:
To specify the image depth setting to 1-bit or 2-bit depth.
Va lu e s:
On* Prints an error report before it discards the job.
Off Discards the print job without printing an error report.
Off* Job time-out does not occur.
On 1 minute A PostScript 3 Compatible error occurs if processing is not completed
after the specified time.
Available Range:
1-900 minutes
Color* Prints in the color mode. Works well with texts and photos.
Black & White Prints in the black and white mode. Works well with texts.
1 Bit
2 Bit*