Dell E525w - Exporting a Certificate Signing Request (CSR)

Using Digital Certificates 245
Exporting a Certificate Signing Request (CSR)
NOTE: To export a CSR from the printer, SSL/TLS Server Communication must be enabled with a self-signed certificate. For
details, see "Preparing to Use HTTPS Communication" on page 244.
NOTE: If you are using a PKCS #12 digital certificate, do not export the CSR; otherwise, the file cannot be uploaded.
1 Launch the Dell Printer Configuration Web Tool by entering the IP address of the printer in your web browser.
For more information, see "Dell™ Printer Configuration Web Tool" on page 75.
2 Click Print Server Settings .
3 Click the Security tab  SSL/TLS .
4 Click Certificate Signing Request (CSR) .
The
Certificate Signing Request (CSR) page is displayed.
5 Specify each item of the certificate signing request, and then click Apply New Settings .
6 Confirm the specified settings, and then click Export .
7 Save a CSR file to your computer.
Use this CSR to receive a signed certificate from a trusted certificate authority.
Uploading a Signed Certificate
After you have received the signed certificate from a trusted certificate authority, upload the signed certificate to the
printer. You can also upload an external certificate such as PKCS #12 that you created without using the CSR from
the printer.
NOTE: The maximum number of digital certificates that you can upload is one.
1 Launch the Dell Printer Configuration Web Tool by entering the IP address of the printer in your web browser.
For more information, see "Dell™ Printer Configuration Web Tool" on page 75.
2 Click Print Server Settings .
3 Click the Security tab  SSL/TLS .
4 Click Upload Signed Certificate .
The
Upload Signed Certificate page is displayed.
5 Click Choose File of File Name , and then select the file to be uploaded.
To upload a PKCS #12 digital certificate, you also need to enter the password that is set on the certificate in
Password and Re-enter Password .
6 Click Import .