Dell E525w - Setting Sounds; Specifying the Fax Settings

Faxing 223
Setting Sounds
Speaker Volume
1 Press the (Menu) button.
2 Press the button until System is highlighted, and then press the (Set) button.
3 Press the button until Admin Menu is highlighted, and then press the (Set) button.
4 Press the button until Fax Settings is highlighted, and then press the (Set) button.
5 Press the button until Line Monitor is highlighted, and then press the (Set) button.
6 Press the button until the desired volume is highlighted, and then press the (Set) button.
7 Reboot the printer by turning the power switch off and then on.
Ringer Volume
1 Press the (Menu) button.
2 Press the button until System is highlighted, and then press the (Set) button.
3 Press the button until Admin Menu is highlighted, and then press the (Set) button.
4 Press the button until Fax Settings is highlighted, and then press the (Set) button.
5 Press the button until Ring Tone Volume is highlighted, and then press the (Set) button.
6 Press the button until the desired volume is highlighted, and then press the (Set) button.
7 Reboot the printer by turning the power switch off and then on.
Specifying the Fax Settings
Changing the Fax Settings Options
1 Press the (Menu) button.
2 Press the button until System is highlighted, and then press the (Set) button.
3 Press the button until Admin Menu is highlighted, and then press the (Set) button.
4 Press the button until Fax Settings is highlighted, and then press the (Set) button.
5 Press the button until the desired menu item is highlighted, and then press the (Set) button.
6 Press the or button until the desired setting is highlighted or enter the value using the numeric keypad.
7 Press the (Set) button to save the selection.
8 If necessary, repeat steps 5 to 7.
9 To return to the previous screen, press the (Back) button.