Dell E525w - Network Connection Setup; Installing PCL, PS and Fax Printer Drivers

52 Installing Printer Drivers on Computers Running Windows
®
11 To change the printer name, enter the printer name in the Printer name text box, and then click Next .
Installation starts.
12 If you do not share your printer, select Do not share this printer . If you share your printer, select Share this printer
so that others on your network can find and use it.
Click Next .
13 As the driver installation is completed, click Print a test page to verify installation. To use this printer as the default
printer, select the
Set as the default printer check box.
14 Click Finish .
Network Connection Setup
Installing PCL, PS and Fax Printer Drivers
1 Insert the Software and Documentation disc into your computer to start Dell Printer Easy Install .
2 Click Main Menu .
3 Click Connect .
4 Select Wireless or Ethernet Connection , and then click Next .
5 Select the printer you want to install from the printer list, and then click Next . If the target printer is not displayed
on the list, click the (Refresh) button or click
add printer to add a printer to the list manually. You may specify
the IP address and port name at this point.
If you have installed this printer on the server computer, select the
I am setting up this printer on a server check
box.
NOTE: If you are running any of the following operating systems, a Windows Security Alert is displayed:
• Windows Vista
®
• Windows Vista
®
64-bit Edition
• Windows
®
7
• Windows
®
7 64-bit Edition
• Windows
®
8
• Windows
®
8 64-bit Edition
• Windows
®
8.1
• Windows
®
8.1 64-bit Edition
• Windows Server
®
2008
• Windows Server
®
2008 64-bit Edition
• Windows Server
®
2008 R2 64-bit Edition
• Windows Server
®
2012
• Windows Server
®
2012 R2
To continue installing the driver, click Unblock or Allow access (for Windows Server
®
2008 R2 and Windows
®
7).
6 Specify the printer settings as necessary, and then click Next .
7 Select the software and documentation you want to install, and then click Install .
You can specify folders in which to install the software and documentation. To change the folders, click
Change
Destination Folder
, and then specify a new location.
8 Click Finish to exit the wizard when the Ready to Print! screen appears.