Dell E525w - Margin Left;Right

198 Copying
Margin Left/Right
To specify the left and right margins of the copy:
1
Load the document(s) face up into the ADF with the top edge of the document(s) in first.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Making Copies From the ADF" on page 191 or "Making Copies From
the Document Glass" on page 189.
2 Press the (Copy) button.
3 Press the button until Preferences is highlighted, and then press the (Set) button.
4 Press the button until Margin Left/Right is highlighted, and then press the (Set) button.
5 Press the or button or enter the desired value using the numeric keypad, and then press the (Set)
button.
NOTE: Values marked by an asterisk (
*
) are the factory default menu settings.
Margin Middle
To specify the middle margin of the copy:
1
Load the document(s) face up into the ADF with the top edge of the document(s) in first.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Making Copies From the ADF" on page 191 or "Making Copies From
the Document Glass" on page 189.
2 Press the (Copy) button.
3 Press the button until Preferences is highlighted, and then press the (Set) button.
4 Press the button until Margin Middle is highlighted, and then press the (Set) button.
5 Press the or button or enter the desired value using the numeric keypad, and then press the (Set)
button.
NOTE: Values marked by an asterisk (
*
) are the factory default menu settings.
4 mm*/0.2 inch* Specify the value in increments of 1 mm/0.1 inch.
Available Range:
0-50 mm/0.0-2.0 inch
0 mm*/0.0 inch* Specify the value in increments of 1 mm/0.1 inch.
Available Range:
0-50 mm/0.0-2.0 inch