220
Scanning
7
Specify the sender address of the e-mail using the numeric keypad or the Address Book.
The specified address is notified to the recipient when the e-mail is sent. If no e-mail address is specified here, the
address in
Reply Address
is notified as a sender information instead. For details, see "E-mail Alert" on
page 104.
NOTE:
Be sure to specify an e-mail address either in
From Setting
or in
Reply Address
. Otherwise, the
printer cannot start sending the e-mail.
8
Configure the scan settings as necessary.
Settings such as file format and color mode are available. For details about setting items, see "Scan Defaults" on
page 121.
9
Ensure that
Start Scan
is highlighted, and then press the
(Start)
button.
To Next Page
Loading...
