Dell G7 7700 - Processor Fan

Steps
1. Align the screw holes on the rear-cover bracket with the screw holes on the system board.
2. Replace the four screws (M2x5) that secure the rear-cover bracket to the system board.
Next steps
1. Install the rear cover.
2. Install the base cover.
3. Follow the procedure in After working inside your computer.
Processor fan
Removing the processor fan
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
About this task
The following image indicates the location of the processor fan and provides a visual representation of the removal procedure.
Removing and installing components
43