Light bar
Removing the light bar
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the 3-cell battery or the 6-cell battery.
About this task
The following image indicates the location of the light bar and provides a visual representation of the removal procedure.
Steps
1. Remove the three screws (M2x4) that secure the touchpad bracket to the palm-rest and keyboard assembly.
2. Lift the touchpad bracket off the palm-rest and keyboard assembly.
3. Lift the light-bar cable-bracket off the system board.
4. Open the latch and disconnect the light-bar cable from the system board.
62
Removing and installing components
To Next Page
Loading...
