Figure 77. installing the display bezel
Steps
1. Place the display assembly on a clean and flat surface.
2. Align and place the display bezel on the display assembly.
3. Starting from the top corner, press on the display bezel and work around the entire bezel until it clicks onto the display
assembly.
4. Press the display-hinge caps down on the display hinges, until they click in place.
Next steps
1. Install the display assembly for computers shipped with a plastic chassis.
2. Install the wireless card for computers shipped with a plastic chassis.
3. Install the M.2 2230 solid-state drive for computers shipped with a plastic chassis.
4. Install the base cover for computer shipped with a plastic chassis.
5. Follow the procedure in After working inside your computer.
108
Removing and installing Field Replaceable Units (FRUs)
To Next Page
Loading...
