Next steps
1. Install the wireless card for computers shipped with an aluminum chassis.
2. Install the 54 W battery for computers shipped with an aluminum chassis.
3. Install the base cover for computers shipped with an aluminum chassis.
4. Follow the procedure in After working inside your computer.
Display assembly
Removing the display assembly for computers shipped with a
plastic chassis
CAUTION: The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in Before working inside your computer.
NOTE: Ensure that your computer is in Service Mode. For more information see, Before working inside your computer.
2. Remove the base cover for computers shipped with a plastic chassis.
About this task
The following images indicate the location of the display assembly and provide a visual representation of the removal procedure.
Figure 68. Removing the screws
98
Removing and installing Field Replaceable Units (FRUs)
To Next Page
Loading...
