Table 39. System setup options—Update, Recovery menu(continued)
Update, Recovery
event of EC corruption, ME corruption, or a hardware issue. The recovery
image must exist on an unencrypted partition on the drive.
BIOS Downgrade
Allow BIOS Downgrade Controls flashing of the computer firmware to previous revisions.
By default, the Allow BIOS Downgrade option is enabled.
SupportAssist OS Recovery Enables or disables the boot flow for SupportAssist OS Recovery tool in the event
of certain computer errors.
By default, the SupportAssist OS Recovery option is enabled.
BIOSConnect Enables or disables cloud Service operating system recovery if the main operating
system fails to boot with the number of failures equal to or greater than the
value specified by the Auto operating system Recovery Threshold setup option
and local Service operating system does not boot or is not installed.
By default, the BIOSConnect option is enabled.
Dell Auto OS Recovery Threshold Allows you to control the automatic boot flow for SupportAssist System
Resolution Console and for Dell operating system Recovery Tool.
By default, the Dell Auto OS Recovery Threshold value is set to 2.
Table 40. System setup options—System Management menu
System Management
Service Tag Displays the Service Tag of the computer.
Asset Tag Creates a computer Asset Tag that can be used by an IT administrator to uniquely
identify a particular computer.
NOTE: Once set in BIOS, the Asset Tag cannot be changed.
AC Behavior
Wake on AC Enables or disables the computer to turn on and go to boot when AC power is
supplied to the computer.
By default, the Wake on AC option is disabled.
Auto On Time Enable to set the computer to turn on automatically every day or on a preselected
date and time. This option can be configured only if the Auto On Time is set to
Everyday, Weekdays, or Selected Days.
By default, the Auto On Time option is disabled.
Diagnostics
OS Agent Requests Enables or disables the computer to turn on by a special LAN signal.
By default, the OS Agent Requests option is enabled.
Power-on-Self-Test Automatic
Recovery
Enables or disables the computer to turn on by a special LAN signal.
By default, the Power-on-Self-Test Automatic Recovery option is enabled.
Table 41. System setup options—Keyboard menu
Keyboard
Fn Lock Options Enables or disables the Fn Lock option.
By default, the Fn Lock option is enabled.
152 BIOS Setup
To Next Page
Loading...
