Dell Inspiron 24 3477 All-in-One - Replacing the back cover

Replacing the back cover
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
About this task
CAUTION: Make sure that no cables are caught between the back cover and the display-assembly base.
Align the tabs on the back cover with the slots on the display-assembly base and snap the back cover into place.
Post-requisite
About this task
Replace the stand.
6
Replacing the back cover 15