Dell Inspiron 24 3477 All-in-One - Removing the memory module

Removing the memory module
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
Steps
1. Remove the stand.
2. Remove the back cover.
3. Remove the system-board shield.
Procedure
Steps
1. Locate the memory module on the system board.
2. Using your fingertips, spread apart the securing clips at each end of the memory-module slot until the memory module pops
up.
3. Slide and remove the memory module from the memory-module slot.
NOTE: Remove the DIMM1, and then remove the DIMM2.
11
Removing the memory module 21