Dell Latitude 5290 2-in-1 - Video screen options; Security screen options

Option Description
• 15 seconds
• 30 seconds
• 1 minute
• 5 minute
• 15 minute
• never
Touchscreen Allows you to controls whether the touchscreen is enabled or disabled. By default, the option is enabled.
Unobtrusive Mode Allows you to select the option. When enabled, pressing Fn+F7 turns o all light and sound emissions in the
system. To resume normal operation, press Fn+F7 again. This option is disabled by default.
Miscellaneous
Devices
Allows you to enable or disable various on board devices:
• Enable Camera This option is enabled by default.
• Enable Secure Digital(SD) CardThis option is enabled by default.
• Secure Digital(SD) Card read only mode
• Secure Digital(SD) Card Read-Only Mode
Video screen options
Option
Description
Display
Brightness(LCD
Brightness)
Allows you to set the display brightness depending up on the power source—On Battery and On AC. The display
brightness is independent for battery and AC adapter. It can be set using the slider.
Video screen options
Option
Description
LCD Brightness Allows you to set the display brightness depending up on the power source (On Battery and On AC).
NOTE: The video setting will be visible only when a video card is installed into the system.
Security screen options
Option
Description
Admin Password Allows you to set, change, or delete the administrator (admin) password.
NOTE: You must set the admin password before you set the system or hard drive password. Deleting the
admin password automatically deletes the system password and the hard drive password.
NOTE: Successful password changes take eect immediately.
Default setting: Not set
System Password Allows you to set, change, or delete the system password.
NOTE: Successful password changes take eect immediately.
62 System setup