micro SD - micro SIM card
uSIM cards can be installed only on tablets shipped with WWAN module.
1 Flip the tablet on a plane and at surface.
2 Press the two Kickstand auto-release pegs, and slide the kickstand [1],[2].
NOTE: Or Pull and slide the kickstand to open, ensure NOT to pull more than 135° to avoid damage to the hinges.
NOTE: Ensure to turn o or disconnect power, to drain ea power before installing the micro SD and/or micro-
SIM.
3 Slide the kickstand to an angle 135°, to microSD and micro-SIM cards slot.
4 Slide the microSD / micro-SIM card cover towards 3° clock [1] and pull the cover [2].
5 Insert the SD card / micro-SIM cards and a lign the cover with the groove on the tablet and slide it inside to secure the microSD and
the micro-SIM cards.
Removing and installing components
9