EasyManua.ls Logo

Dell Latitude 5290 2-in-1 - Page 69

Dell Latitude 5290 2-in-1
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Option Description
Default setting: Wake on AC is not selected.
Auto On Time Allows you to set the time at which the tablet must turn on automatically. The options are:
Disabled
Every Day
Weekdays
Select Days
Default setting: Disabled
USB Wake Support Allows you to enable USB devices to wake the system from Standby.
NOTE: This feature is only functional when the AC power adapter is connected. If the AC power adapter
is removed during Standby, the system setup removes power from all the USB ports to conserve battery
power.
Wake on the Dell USB-C dock
Default setting: The option is enabled by default.
Wireless Radio
Control
Allows you to enable or disable the feature that automatically switches from wired or wireless networks without
depending on the physical connection.
Control WLAN Radio
Control WWAN Radio
Default setting: The options are disabled.
Peak Shift This option enables you to minimize the AC power consumption during the peak power times of day. After you
enable this option, your system runs only in battery even if the AC is attached.
Enable peak shift
Set battery threshold (15% to 100%) - 15 % (enabled by default)
Advanced Battery
Charge
Conguration
This option enables you to maximize the battery health. By enabling this option, your system uses the standard
charging algorithm and other techniques, during the nonwork hours to improve the battery health.
Disabled
Default setting: Disabled
Primary Battery
Charge
Conguration
Allows you to select the charging mode for the battery. The options are:
Standard—Fully charges your battery at a standard rate—enabled by default.
ExpressCharge—The battery charges over a shorter time using Dell’s fast charging technology.
If Custom Charge is selected, you can also congure Custom Charge Start and Custom Charge Stop.
NOTE: All charging mode may not be available for all the batteries. To enable this option, disable the
Advanced Battery Charge Conguration option.
System setup 69

Table of Contents

Related product manuals