Removing the ngerprint reader
1 Follow the procedure in Before working inside your computer.
2 Remove the :
a base cover
b battery
c hard drive
d SSD card
e SSD frame
f WLAN card
g WWAN card (optional)
h chassis frame
3 To remove the ngerprint reader:
a Lift the latch and disconnect the ngerprint cable from the connector on the ngerprint reader [1].
b Remove the M2x2 screw securing the ngerprint reader bracket to the system [2].
c Lift the ngerprint reader bracket from the system [3].
d Lift the ngerprint reader o the computer [4].
Disassembly and reassembly 27
To Next Page
Loading...
