Installing display bezel
NOTE: The display bezel is a disposable part and should be replaced with a new display bezel anytime it is removed from the
system.
1 Place the display bezel on the display assembly.
NOTE: Remove the protective covering on the adhesive on the LCD bezel before placing on the display assembly.
2 Starting from a top corner, press on the display bezel and work around the entire bezel until it clicks on to the display assembly.
3 Install the:
a display assembly
b display hinge cover
c WWAN card (optional)
d WLAN card
e battery
f base cover
4 Follow the procedure in After working inside your computer.
Display panel
Removing display panel
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c WLAN card
d WWAN card (optional)
e display hinge cover
f display assembly
g display bezel
3 Remove the four M2x3 screws that secure the display panel to the display assembly [1] and lift to turn over the display panel to access
the display cable [2].
Disassembly and reassembly
53
To Next Page
Loading...
